Can i print with flexible filament? The recommended temperature for printing is at 210 degrees.
Hi, Anthony! The only filament meant for use with the MOD-t is 100% PLA filament. I hope this info helps!
It may work, Anthony, but while we can attest the quality of our 100% PLA filament, especially when used with the MOD-t, not PLA filaments are created equally. A good rule of thumb is that any specialty PLA (such as hybrid, glow-in-the-dark or flexible, to name a few) is something that won’t necessarily play nice with the hot end on your MOD-t. It can bubble, clog, jam, and possibly strip the inner lining of the part. If you want to use a 3rd party PLA, Hatchbox is the one we recommend, as it has the best reviews, has performed the best when tested in-house. Be sure to stay away from black, white and gray in Hatchbox, as we have seen bubbling and clogging in our hot ends. I hope this information, helps, and I apologize for any disappointment caused.
This question has received the maximum number of answers.